Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Central Tunnel Cover

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Center console tunnel

See other generations:
Video tutorial

Removing the central tunnel cover is very simple and does not require special tools; start by removing the small storage compartment at the rear, pull out the protective cap of the underlying screw and undo it; move to the front by extracting the two rubber discs covering the bottom of the two storage compartments and undo the screws underneath; at this point, detach the covering gaiter of the gear lever and that of the handbrake by pushing them into their respective seats and complete the removal of the tunnel cover.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Console from a Ford Focus
How to Remove the Centre Console from a Ford Focus
Ford Focus (2011-2018 / MK 3) In this video, we will see how to remove the centre console from a Ford Focus. Use a plastic lever to pry off the cover located at the bottom of the …
How to Remove the Gear Gaiter on a Ford Focus
How to Remove the Gear Gaiter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to replace the gear gaiter? This guide shows how to remove the gaiter from above the plastics of the centre console. Grip the knob with your han…
Dashboard Disassembly Instructions
Dashboard Disassembly Instructions
Ford Focus (1998-2004 / MK 1) Disassembling the dashboard is a time-consuming task that requires a lot of patience since there are many components to remove in a specific sequence…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos