Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the steering rods of the Ford F-350

Model: Ford F-350 1992 - Years 1992-1997
Part: Tie rods

In this video tutorial we will see how to remove and replace the steering rods of the Ford F-350 first series, following these simple and quick steps. First of all we lift the car and start by unscrewing the nut of the tie rod pin, first removing the cotter pin or the stop with pliers; after which we remove the tie rod and replace it with the new one, of the right type, making the right tightening. It is essential that the steering rod is of the right length, so as not to compromise the safety and road holding of the car; always use original spare parts!

Posted on 22 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulbs in the Ford F-350?
How to replace the rear light bulbs in the Ford F-350?
Ford F-350 (2011-2016 / P473) In this tutorial we can see how to replace the rear light bulbs in the Ford F-350 pickup, very simple and fast operation. To do this we will only nee…
How to replace the key battery of the Ford F 350
How to replace the key battery of the Ford F 350
Ford F-350 (1999-2007 / Phn131) Since this is the key of the first model of Ford F 350 we are faced with a completely analog product with a rather basic structure. All this facilita…
How do you replace the rear brake pads of the Ford F-350?
How do you replace the rear brake pads of the Ford F-350?
Ford F-350 (1999-2007 / Phn131) In order to replace the rear brake pads of the Ford F-350 you have to remove the wheel corresponding to the pads to be replaced by loosening its fixi…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos