Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb in the Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Tail light bulb

To replace the rear light bulb in the Ford Escape, open the trunk lid to access the screws on the side of the light. By removing the cover caps and loosening the screws underneath, you can pull the rear light out of its housing. This will allow you to disconnect the rear connectors and remove the bulbs from their sockets, replacing them with new replacement parts. After the replacement, reinstall the light and secure it with the screws removed earlier.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb in a Ford Escape
How to Replace the Headlight Bulb in a Ford Escape
Ford Escape (2008-2012 / MK 2) To replace the headlight bulb in a Ford Escape, open the hood to access the back of the headlight corresponding to the bulb to be replaced. Remove th…
How to Replace the Headlight Bulb on a 2014 Ford Escape
How to Replace the Headlight Bulb on a 2014 Ford Escape
Ford Escape (2013-2019 / MK 3) If you are wondering how to properly replace the headlight bulb on your 2014 Ford Escape, follow the steps outlined in this guide. First, completely …
How to replace the fog light bulb of the Ford Escape
How to replace the fog light bulb of the Ford Escape
Ford Escape (2013-2019 / MK 3) To replace the fog light bulbs of the Ford Escape car model produced from 2013 to 2019, we need to use a 7mm wrench to unscrew the clips on the wheel…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos