Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Tail light bulb

Replacing the reverse light bulb on your Ford Fiesta is undoubtedly one of the simplest tasks you can do independently. Before proceeding, for safety reasons, it is advisable to wear rubber gloves and disconnect the battery. First, go to the rear of the car and fully lift the bonnet. Next, using a cross-head screwdriver, unscrew the two screws holding the headlamp and pull it out. At this point, remove the old bulb and replace it with a new one. Finally, reassemble the headlamp and screw the screws back in.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Reverse Switch on a Ford Fiesta?
How to Replace the Reverse Switch on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the reverse switch on a Ford Fiesta, access the underside of the car near the engine bay. The switch will be located next to the gearbox a…
How to Replace the Reverse Light Bulb on a Ford Fiesta
How to Replace the Reverse Light Bulb on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the reverse light bulb on a Ford Fiesta, go to the boot and remove the side carpet. At the back of the headlamp, you will find a plastic c…
What to Do if the Reversing Bulb on a Ford Fiesta Does Not Work
What to Do if the Reversing Bulb on a Ford Fiesta Does Not Work
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, find out how to troubleshoot if the reversing bulb stops working: first, locate the switch, but the first step is to disconnect the el…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos