Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to Do if the Reversing Bulb on a Ford Fiesta Does Not Work

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Light bulb

See other generations:
Video tutorial

In this video, find out how to troubleshoot if the reversing bulb stops working: first, locate the switch, but the first step is to disconnect the electrical connector and bridge it to see if the bulb lights up. If it does, the issue is not with the electrical connector or the bulb - which you already confirmed was good.

Next, clean the contacts, which may have oxidised.

If it still does not work, unscrew the switch (after disconnecting the power). You can find a complete switch for £8.91 on Auto-Doc with code 330263, plus £9.95 for shipping.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Replacing the Fog Light Bulb in a Ford Fiesta Mk7.
Replacing the Fog Light Bulb in a Ford Fiesta Mk7.
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the fog light bulb in the front headlamp of a Ford Fiesta, the first thing to do is to secure the car on a flat surface to work safely and…
How to Replace the Boot Light Bulb on a Ford Fiesta
How to Replace the Boot Light Bulb on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this short and simple guide, see how to remove and replace the boot light bulb on a Ford Fiesta. First, open the rear tailgate and start by removi…
How to Replace the Headlamp Bulb on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video tutorial, you will see how to replace the headlamp bulb on a Ford Fiesta by following a few simple steps that will allow you to work in…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos