Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Replacing the fog light bulb in the Ford Fiesta mk7.

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VII, Fiesta 7, MK 7 - Years 2017-2023
Part: Headlight bulb
Operation: Replacing the fog light bulb in the Ford Fiesta mk7.

To replace the Ford Fiesta headlight fog bulb, the first thing we need to do is to immobilize the car on a plane, so that we can work on it in conditions of stability and safety and thus guarantee the safety of the car. 'operator. Once this is done, we open the front hood of the engine compartment. The example shown relates to the left front headlight. We proceed to remove it from its housing by unscrewing the screws that secure it in place, as shown in the images. Below, we find the seat of the fog lamp. We disconnect the power supply and extract the bulb to be replaced. We replace it and reassemble everything, proceeding backwards according to the operations seen previously.


Posted on 4 March 2024 by ScegliAuto



How to replace the front fog light bulb of a Ford Fiesta.
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) Below we will see the guide that will allow us to disassemble and replace the front fog light bulb of the Ford Fiesta. First, let's move to the front
How to replace the fog light bulbs on the Ford Fiesta.
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Today we will explain how to replace the fog light bulbs on a Ford Fiesta vehicle. The first thing to do is to remove the lower grille surrounding th
How to replace the rear fog light on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this short and simple guide we will see how to disassemble and replace the Ford Fiesta rear reflector or fog light. In order to access the rear bu

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos