|
Do it yourself
| |||
| ||||
How to Replace the Reverse Light Bulb on a Ford Fiesta
Model: Ford Fiesta
MK 7, MK VII, Fiesta 7
- Years 2017-2023
To replace the reverse light bulb on a Ford Fiesta, go to the boot and remove the side carpet. At the back of the headlamp, you will find a plastic clip that you need to unscrew. After unscrewing the clip, remove the two outer screws from the headlamp and take it out. Once the headlamp is removed, disconnect the connector, then detach the plastic housing where the rear bulbs are located from the headlamp. Locate the reverse light bulb and gently pull it out. In the video, the bulb simply had a poor connection and was reinserted, but if it needs replacing, take the new bulb, place it in the bulb holder, go to the back of the car, reconnect the connector, turn on the ignition, engage reverse gear, and check that the bulb lights up. Now, take the plastic housing for the bulbs, attach it to the back of the headlamp, reconnect the connector, and position the headlamp. Finally, screw in the two outer screws of the headlamp and the internal rear clip.
Updated on 29 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford Fiesta
(2002-2008 /
Fiesta 5, MK 5, MK V)
Replacing the reverse light bulb on your Ford Fiesta is undoubtedly one of the simplest tasks you can do independently. Before proceeding, for safety…
Ford Fiesta
(2017-2023 /
MK 7, MK VII, Fiesta 7)
To replace the reverse switch on a Ford Fiesta, access the underside of the car near the engine bay. The switch will be located next to the gearbox a…
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
In this video, find out how to troubleshoot if the reversing bulb stops working: first, locate the switch, but the first step is to disconnect the el…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Remote Battery for the Volvo XC40?
In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |