Do it yourself
| ||||
|
Ford Fiesta - Video tutorial
Model: Ford Fiesta
MK VII, Fiesta 7, MK 7
- Years 2017-2023 Before we can begin, we will have to go and open the tailgate of the luggage compartment of our Ford Fiesta. So let's start by unscrewing and removing the screws that secure the rear light to the car. Once this is done, we will have to go and detach the light from its housing. By doing so, we will have reached the back side of the burned out light bulb. We then proceed by going to rotate the support base of the burnt out bulb in an anti-clockwise direction, and then extract it from the light, and we will have reached the bulb. When we have completed this step, we will be able to disconnect and remove the bulb, and we will have finished the disassembly. To mount the new bulb and close everything, all we have to do is follow this procedure in reverse, and we will have completed the replacement.
Posted on 11 January 2024 by ScegliAuto
How do you replace the interior light bulb on a Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In order to replace the interior light bulb of the Ford Fiesta, you need to pry with an object, so that the ceiling light positioned immediately behi
How to replace the trunk light bulb on the Ford Fiesta.
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) In this short and simple guide, we will see how to disassemble and replace the bulb of the luggage compartment light in the Ford Fiesta. First of all
Ford Fiesta rear light bulb replacement
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In this video tutorial we will see the instructions that will allow us to remove and replace the rear light bulb of a Ford Fiesta second series. Firs Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |