Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb of a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: License plate light

Using a flathead screwdriver to pry, start by unclipping the clip that secures the number plate light assembly of your Ford Fiesta, then extract the number plate light unit. Once done, rotate the bulb socket anti-clockwise to disconnect it. This will give you access to the blown bulb, which you need to remove. After completing this step, you can take out the blown bulb, and you will have finished the disassembly. To install the new bulb and close everything up, simply follow this procedure in reverse, and the replacement will be complete.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Light Bulb on a Ford Fiesta
How to Replace the Number Plate Light Bulb on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to replace the number plate light bulb on a Ford Fiesta? In this guide, learn how to do it: use a screwdriver to unscrew the securing screws of t…
How to Replace the Number Plate Bulbs on the Ford Fiesta
How to Replace the Number Plate Bulbs on the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Here are the instructions to remove and replace the number plate bulbs on the Ford Fiesta, following these simple steps. First, move to the rear of t…
How to Replace the Damaged Number Plate Bulb on a Ford Fiesta
How to Replace the Damaged Number Plate Bulb on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to replace the damaged number plate bulb on a Ford Fiesta? Follow these steps: Use a screwdriver or plastic lever to remove the number plate ligh…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos