Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Number Plate Lights from the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: License plate light

This guide provides instructions on how to remove and replace the number plate lights on the Ford Fiesta, following these simple steps. First, open the bonnet of your car and begin to remove the number plate light housing by prying it with a thin, pointed object; then disconnect the electrical connector if you wish to remove the bulb and the holder, as shown in the video. Now replace the bulb with a new one of the correct type and with the same fitting; likewise, replace the other number plate light!

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulbs on the Ford Fiesta
How to Replace the Number Plate Bulbs on the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Here are the instructions to remove and replace the number plate bulbs on the Ford Fiesta, following these simple steps. First, move to the rear of t…
How to replace the rear light of the Ford Fiesta MK7
How to replace the rear light of the Ford Fiesta MK7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today we will explain how to replace the license plate light of the Ford Fiesta model MK7. To replace the license plate light, we need to use a small…
How to Remove and Change the Number Plate Bulbs on a Ford Fiesta
How to Remove and Change the Number Plate Bulbs on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove and change the damaged number plate bulbs on a Ford Fiesta. Using a screwdriver or plastic trim tool, remove the number plate light uni…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos