Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace the license plate bulbs of the Ford Fiesta.

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK V, Fiesta 5, MK 5 - Years 2002-2008
Part: License plate light
Operation: How to replace the license plate bulbs of the Ford Fiesta.

Let's briefly see the instructions that will allow us to disassemble and replace the license plate bulbs of the Ford Fiesta, following these simple steps. First of all, let's move to the rear of the car and start unscrewing the fastening screws of the license plate light fixture, using a Phillips screwdriver; then remove the bulb, as shown in the video. At this point, install the new license plate light, of the right type and with the same attachment; in the same way, we will also replace the other license plate light, following the video tutorial until the end!


Posted on 3 August 2023 by ScegliAuto



How to replace license plate bulbs on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Let's see how to replace the damaged bulbs placed in the license plate of a Ford Fiesta. With a screwdriver or plastic lever we remove the spotlight
How to remove and change the license plate bulbs of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) How to remove and change damaged license plate bulbs on a Ford Fiesta. With a screwdriver or plastic lever we remove the spotlight of the license pla
How to remove Ford Fiesta license plate lights
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this guide, let's briefly see the instructions that will allow us to disassemble and replace the license plate lights of the Ford Fiesta, by follo

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos