Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulbs on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: License plate light

Learn how to replace the damaged bulbs located in the number plate of a Ford Fiesta. Using a screwdriver or plastic lever, remove the number plate light fitting located in the rear bumper of the car. Once the light fitting is removed: extract the bulb holder, then disconnect the bulb from it. Install the new LED bulb (ensuring the size and voltage are the same), insert it into the bulb holder, and reassemble the light fitting into the metal of the tailgate, pressing until the clips lock automatically. Test the correct functioning of the previously installed bulb.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulbs on the Ford Fiesta
How to Replace the Number Plate Bulbs on the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Here are the instructions to remove and replace the number plate bulbs on the Ford Fiesta, following these simple steps. First, move to the rear of t…
How to Remove and Change the Number Plate Bulbs on a Ford Fiesta
How to Remove and Change the Number Plate Bulbs on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove and change the damaged number plate bulbs on a Ford Fiesta. Using a screwdriver or plastic trim tool, remove the number plate light uni…
What is the number plate light fuse in the Ford Fiesta?
What is the number plate light fuse in the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If the number plate light on your Ford Fiesta has suddenly stopped working and the bulbs are intact, check the status of the corresponding fuse, as i…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos