Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Replacement of the LED license plate light bulb for the Ford Fiesta.

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: License plate light
Operation: Replacement of the LED license plate light bulb for the Ford Fiesta.

Let's see how to proceed if the rear license plate light of our Ford Fiesta burns out or if we want to improve its efficiency. Using a flathead screwdriver, we detach the spotlight above the license plate and once freed from its housing, we remove the bulb holder by rotating it. We replace the bulb with a new LED one and check its proper functioning by turning on the headlights. Compared to the old bulbs, with the new LED ones, we must respect the correct polarity: if they don't turn on, we simply remove them and rotate them 90°. We reattach the spotlight to its proper housing and repeat the same steps with the other one.


Posted on 20 September 2023 by ScegliAuto



How to replace the license plate light bulb on Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) How to replace the bulb of the license plate light on Ford Fiesta? Let's see in this video how to replace it: with a screwdriver we unscrew the faste
How to replace the license plate bulbs of the Ford Fiesta.
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Let's briefly see the instructions that will allow us to disassemble and replace the license plate bulbs of the Ford Fiesta, following these simple s
How to replace a damaged license plate bulb on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) How to replace a damaged license plate bulb on Ford Fiesta? Let's see how to do it: with a screwdriver or plastic lever we remove the spotlight of th

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos