Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Switch on a Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Checks and maintenance

To replace the reverse switch on a Ford Fiesta, access the underside of the car near the engine bay. The switch will be located next to the gearbox and must be disconnected from its terminal before being unscrewed and removed from its housing. Once the old switch is removed, connect a new one to the appropriate cable and screw it back into its housing next to the gearbox. After installation, engage reverse gear and check that the corresponding bulb lights up.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob from a Ford Fiesta
How to Remove the Gear Knob from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, sit in the driver's seat of your Ford Fiesta. Begin by gripping the gear knob with both hands. Next, unscrew it from the gear lever.…
How to Replace the Remote Battery of the Ford Fiesta?
How to Replace the Remote Battery of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the battery of the Ford Fiesta, use a tool to pry off the cover on the back of the remote, allowing you to remove the emergency key inside…
How to remove the Ford 6000 CD car radio from the Ford Fiesta
How to remove the Ford 6000 CD car radio from the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Thanks to the following video tutorial, we will show you the steps to remove the Ford 6000 CD radio from Ford vehicles. The Ford vehicles on which we…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos