Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the light switch of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
Video tutorial

In this guide we will see the steps that will allow us to disassemble and replace the light switch (or turn signal switch) of the Ford Fiesta. First of all, we get into the car and start removing the plastic cover located on the side of the dashboard; then we pry internally on the turn signal switch to detach it and remove it, disconnecting the electrical connector located on the back, as shown in the video.

At this point, we carry out the repair or replacement of the turn signal switch with the new one; we verify its correct operation and reassemble everything!


Posted on 2 December 2024 by ScegliAuto


Related tutorials

How to Replace the Stalk Switch on the Ford Fiesta
How to Replace the Stalk Switch on the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this guide, discover how to remove and replace the stalk switch or headlight switch on the Ford Fiesta by following these simple and quick steps. …
How to Remove the Indicator Stalk from a Ford Fiesta
How to Remove the Indicator Stalk from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Have you encountered problems with the indicator stalk on your Ford Fiesta? Watch this video to learn how to proceed with the disassembly. First, dis…
How to Remove the Instrument Cluster from a Ford Fiesta
How to Remove the Instrument Cluster from a Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Before you start, sit in the driver's seat of your Ford Fiesta. Begin by removing the steering column cover by unscrewing the relevant fixing screws.…

    Frequently Asked Questions

    • Fiesta 1996-2002 - How to replace the ignition lock on a Ford Fiesta? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos