Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Ford Fiesta

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002
Part: Instrument cluster

Before you start, sit in the driver's seat of your Ford Fiesta. Begin by removing the steering column cover by unscrewing the relevant fixing screws. Next, unscrew and remove the screw that secures the light switch stalk and disconnect the associated electrical connector, then remove the light switch stalk itself. At this point, unscrew and remove the screws that secure the instrument cluster bezel, then remove the bezel itself, revealing the screws that hold the instrument cluster. Unscrew and remove these screws, then extract the instrument cluster and disconnect the relevant electrical plugs to complete the removal.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster of a Ford Fiesta
How to Remove the Instrument Cluster of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you start, sit in the driver's seat of your Ford Fiesta. Begin by disengaging and removing the cover located on the upper side of the instrume…
How to Remove the Instrument Cluster from a Ford Fiesta
How to Remove the Instrument Cluster from a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Before you start, sit in the driver's seat of your Ford Fiesta. Begin by lowering the steering wheel completely using the lever located on the unders…
How to Remove the Instrument Cluster on a Ford Fiesta MK7
How to Remove the Instrument Cluster on a Ford Fiesta MK7
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's video, you will learn how to remove the instrument cluster on a Ford Fiesta MK7, following the instructions below. First, open the bonnet …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos