Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster on a Ford Fiesta

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002
Part: Instrument cluster

Removing the instrument cluster on a Ford Fiesta? Let’s see how to disassemble the instrumentation. Remove the steering trim frame with a plastic lever (unscrew the securing screws). Remove the instrument cluster trim (remove the steering wheel if you cannot detach it). Unscrew the securing screws of the instrument cluster with a screwdriver; disconnect the plastics at the centre of the cluster. Remove the instrument cluster along with the power cable located at the back of the cluster. Fit a new part or reassemble the same one (replace the LEDs/bulbs in the cluster). Refit all the covering plastics.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster from a Ford Fiesta
How to Remove the Instrument Cluster from a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Before you start, sit in the driver's seat of your Ford Fiesta. Begin by lowering the steering wheel completely using the lever located on the unders…
Removing the Air Vents from a Ford Fiesta
Removing the Air Vents from a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Remove the air vents from a Ford Fiesta. Follow this guide to proceed with the removal. Use a plastic lever to detach the upper and lower trims of th…
How to Remove the Front Door Panel of a Ford Fiesta
How to Remove the Front Door Panel of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you begin, open the front door of your Ford Fiesta. Using a thin but sturdy tool, start by prying, pulling out, and removing the door panel in…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos