Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs in a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

In this video, you will see how to replace the dipped beam bulbs in a Ford Fiesta 6. For this operation, you will need the correct replacement bulbs, a flathead screwdriver, and a Torx T15 key. First, unscrew the two indicated screws located on the top side of the headlamp, then remove the small rubber cap and the plastic rivet underneath.

Once done, carefully unclip the headlamp from the bodywork enough to access the rear.

To remove the bulb holder, unscrew the two screws using the Torx key. Finally, reassemble everything by following the reverse procedure.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Removing Front Headlights on Ford Fiesta
Removing Front Headlights on Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you will learn how to remove the headlights and replace the bulbs on the Ford Fiesta. First, open the engine bonnet: release …
How to Replace the Rear Light Bulbs on a Ford Fiesta?
How to Replace the Rear Light Bulbs on a Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) To replace the rear light bulbs on a Ford Fiesta, lift the boot and remove the screws located next to the seal, right next to the light. This will al…
How to Replace the Dipped Beam Bulbs in a Ford Fiesta?
How to Replace the Dipped Beam Bulbs in a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) .. In this tutorial, we will see how to replace the dipped beam bulbs in a Ford Fiesta, a very simple and cost-effective operation. Before.. …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos