Do it yourself
Frequently asked questions about cars and motorcycles

Where is the heating resistor located in the Ford Fiesta?

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Checks and maintenance

In this video, you can see where the heating resistor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple and quick operation. As shown, it is located inside the junction between the centre tunnel and the dashboard and is accessible by removing the panel on the driver's side. Once done, locate the white connector, disconnect it, and undo the two fixing screws with a Torx T20 spanner. At this point, you can insert the replacement part and reassemble everything by following the reverse procedure.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, see where the heating resistor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple and quick ope…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Here’s how to replace the fan resistor on a Ford Fiesta. Follow these steps to remove the part: use a lever to remove the plastics under the centre t…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The following steps will show us how to disassemble and replace the resistor of the cabin fan of the Ford Fiesta. First, we enter the cabin and start…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos