Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Blower motor

Here’s how to replace the fan resistor on a Ford Fiesta. Follow these steps to remove the part: use a lever to remove the plastics under the centre tunnel, and with a screwdriver, unscrew the cover (where the resistor is located). Disconnect the large connector from the resistor, then pull it out of the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover of the resistor and tighten the screws. Check the correct installation of the previously fitted parts and test the fan's proper operation.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin fan resistor of the Ford Fiesta
How to replace the cabin fan resistor of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The following steps will show us how to disassemble and replace the resistor of the cabin fan of the Ford Fiesta. First, we enter the cabin and start…
How to Remove the Cabin Fan Resistor from a Ford Fiesta
How to Remove the Cabin Fan Resistor from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide will help you remove and replace the cabin fan resistor on a Ford Fiesta. First, get inside the vehicle and remove the plastic cover locat…
Replacing the Fan Resistor on a Ford Fiesta
Replacing the Fan Resistor on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Are you having issues with the ventilation fan? Learn how to remove the fan resistor on a Fiesta. Open the car door and remove the trim plastics from…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos