Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fan Resistor on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Blower motor

In this video, you will learn how to remove the fan resistor in the cabin of a Ford Fiesta. The fan resistor is located at the bottom right of the glove compartment. Use a plastic lever to detach the trim at the lower right of the centre tunnel; get a screwdriver and remove the trim pieces, then extract the worn resistor. Insert a new resistor, ensuring it connects properly to the car's power terminal. Refit the filter box cover and tighten the screws. Check the correct installation of the previously mounted parts.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) .. Here’s how to replace the fan resistor on a Ford Fiesta. Follow these steps to remove the part: use a lever t.. …
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Are you having issues with the ventilation fan? Learn how to remove the fan resistor on a Fiesta. Open the car door and remove the trim plastics from…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If the cabin ventilation fan does not activate or only works at maximum speed despite adjusting the speed setting, the resistor controlling the fan m…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos