Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Blower motor

If the cabin ventilation fan does not activate or only works at maximum speed despite adjusting the speed setting, the resistor controlling the fan motor speed is likely damaged. Replacing this resistor is straightforward, and the part is easy to obtain. The resistor is located near the cabin fan motor, directly behind the central console of the dashboard. You can access it easily from the passenger side by removing the side cover of the tunnel.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin fan resistor of the Ford Fiesta
How to replace the cabin fan resistor of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The following steps will show us how to disassemble and replace the resistor of the cabin fan of the Ford Fiesta. First, we enter the cabin and start…
How to Remove the Cabin Fan Resistor from a Ford Fiesta
How to Remove the Cabin Fan Resistor from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide will help you remove and replace the cabin fan resistor on a Ford Fiesta. First, get inside the vehicle and remove the plastic cover locat…
How to Replace the Fan Resistor on a Ford Fiesta
How to Replace the Fan Resistor on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Here’s how to replace the fan resistor on a Ford Fiesta. Follow these steps to remove the part: use a lever to remove the plastics under the centre t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos