Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan Resistor from a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017

This guide will help you remove and replace the cabin fan resistor on a Ford Fiesta. First, get inside the vehicle and remove the plastic cover located at the bottom left on the passenger side by taking out the plastic clips. You will find the cabin fan and its resistor at the back, as shown in the video. At this point, remove and replace the cabin fan resistor by disconnecting the electrical connector. Install the new original resistor and refit the plastic side cover!

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin fan resistor of the Ford Fiesta
How to replace the cabin fan resistor of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The following steps will show us how to disassemble and replace the resistor of the cabin fan of the Ford Fiesta. First, we enter the cabin and start…
How to Replace the Fan Resistor on a Ford Fiesta
How to Replace the Fan Resistor on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Here’s how to replace the fan resistor on a Ford Fiesta. Follow these steps to remove the part: use a lever to remove the plastics under the centre t…
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Is the cabin ventilation fan not working? Let's see how to remove the fan resistor on a Ford Fiesta. Open the car door and unlock the front bonnet. L…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos