Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan resistor of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017

The following steps will show us how to disassemble and replace the resistor of the cabin fan of the Ford Fiesta. First, we enter the cabin and start removing the plastic partition that we find at the bottom left, on the passenger side; inside we will find the cabin fan and its resistor, as shown in the video. At this point, we disconnect the electrical connector of the resistor, unscrewing the two fixing screws; we disconnect the resistor to replace it with the new original one, finally checking the operation of the fan at various speeds.

Posted on 9 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Fan Resistor from a Ford Fiesta
How to Remove the Cabin Fan Resistor from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide will help you remove and replace the cabin fan resistor on a Ford Fiesta. First, get inside the vehicle and remove the plastic cover locat…
How to Replace the Fan Resistor on a Ford Fiesta
How to Replace the Fan Resistor on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Here’s how to replace the fan resistor on a Ford Fiesta. Follow these steps to remove the part: use a lever to remove the plastics under the centre t…
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Is the cabin ventilation fan not working? Let's see how to remove the fan resistor on a Ford Fiesta. Open the car door and unlock the front bonnet. L…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos