Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Blower motor

Is the cabin ventilation fan not working? Let's see how to remove the fan resistor on a Ford Fiesta. Open the car door and unlock the front bonnet. Lift the bonnet and detach the engine cover (if present): locate the fan resistor (plastic connector). Once the connector is disconnected from the damaged part, simply fit a new one of the same type and voltage. Refit the engine cover cap after replacement. Check the proper functioning of the ventilation fan after installation: enter the vehicle and activate the fan.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The following steps will show us how to disassemble and replace the resistor of the cabin fan of the Ford Fiesta. First, we enter the cabin and start…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide will help you remove and replace the cabin fan resistor on a Ford Fiesta. First, get inside the vehicle and remove the plastic cover locat…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Here’s how to replace the fan resistor on a Ford Fiesta. Follow these steps to remove the part: use a lever to remove the plastics under the centre t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos