Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan on a Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Blower motor

See other generations:
Video tutorial

Removing the ventilation fan from the Fiesta. Here’s how to do it from inside the vehicle.

The cabin ventilation fan is located in the dashboard on the passenger side. After removing the covering plastics, unscrew the securing screws on the fan cover with a screwdriver.

Once this is done, pull off the cover with the fan after disconnecting the power cables. Clean the fan as necessary (disassemble the fan and its parts).

Refit the previously removed fan or a new one along with all its components in the glove compartment. Finally, test the correct operation of the air fan.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Is the cabin ventilation fan not working? Let's see how to remove the fan resistor on a Ford Fiesta. Open the car door and unlock the front bonnet. L…
Removing the Fan Resistor on a Fiesta
Removing the Fan Resistor on a Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The cabin resistor is located at the bottom right of the centre tunnel (under the glove compartment). Unscrew the securing screws of the tunnel cover…
How to replace the cabin fan resistor of the Ford Fiesta
How to replace the cabin fan resistor of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The following steps will show us how to disassemble and replace the resistor of the cabin fan of the Ford Fiesta. First, we enter the cabin and start…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos