Do it yourself
Frequently asked questions about cars and motorcycles

Where is the heating resistor located in the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Checks and maintenance

In this video, see where the heating resistor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple and quick operation. As shown, the resistor is located right on the cabin fan, which is positioned on the passenger side, at the junction between the dashboard and the centre tunnel. Before disassembling it, ensure the key is not inserted, then remove the cover, disconnect the power connector, and unscrew the two fixing bolts with a Torx T20 spanner. To fit the replacement, simply follow the reverse procedure.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video, you can see where the heating resistor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple and q…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Here’s how to replace the fan resistor on a Ford Fiesta. Follow these steps to remove the part: use a lever to remove the plastics under the centre t…
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) This video tutorial demonstrates how to replace the cabin fan resistor in a Ford Fiesta. If the cabin fan is not working as it should, try replacing …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos