Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the spark plugs on the Ford Fiesta 5?

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Spark plugs

In order to replace the spark plugs on the Ford Fiesta 5, you need to open the hood, unscrewing the screws that secure the air filter box and the plastic cover of the upper part of the engine block. Once these two parts have been removed, it will be possible to disconnect the coils from the spark plugs and extract them from their housings, in the rear part of the engine block. Once the old spark plugs have been removed, you will be able to insert the new ones and go and connect them to the coils, covering everything with the plastic panel and fixing the air filter box again.

Posted on 13 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Spark Plugs on a Ford Fiesta
How to Replace Spark Plugs on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, MK 6, Fiesta 6) Remove the spark plugs from a Ford Fiesta: open the engine bay, lift the bonnet, and secure it with the prop rod. Remove the coils from the engine he…
How to replace the spark plugs on a Ford Fiesta
How to replace the spark plugs on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, MK 6, Fiesta 6) Before we begin, we will have to go and open the front hood of our Ford Fiesta. So let's start by disconnecting the plugs that are connected to the s…
How to remove the spark plugs on Ford Fiesta
How to remove the spark plugs on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Let's see how to remove the spark plugs of a Ford Fiesta. We raise the front hood to access the Fiesta's engine. We disassemble the motor cover panel…

Other guides you may be interested in

How to Adjust the Handbrake on VW Polo

If pulling the handbrake lever results in a long travel distance, significantly exceeding the usual 4 to 5 clicks, it means you need to adjust the travel to compensate for cable slack and wear on the shoes. This is a manual operation carried out using the adjustment nuts located at the base of the handbrake lever. Release and lift the plastic cover at the base of the lever to access the cables (one for each shoe) and their respective adjusters. First, loosen the lock nut and tighten the nut to pull the cable until the lever achieves a travel of 4 to 5 clicks.

Watch the video!


by ScegliAuto

More videos