Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plug wires of a Ford Fiesta MK7 1.4 GPL

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Spark plugs

See other generations:
Video tutorial

In this video we can see how to change the spark plug wires of a Ford Fiesta MK7 1.4 LPG: first we need to move the box where the LPG injector wires are located; there are two 4 mm bolts to remove, and then remove the two 13 mm bolts that are attached to the sides of the bracket.

The cylinder wires are crossed, and to avoid mistakes (even if they are of different lengths) it is advisable to change them one at a time.

We remove the first wire, pressing on the side rubber clips, in order to disconnect the connector and then the cap from the coil. The reassembly is just as simple: proceed in reverse, starting with the coil cap and then putting the connector back in place.


Posted on 23 July 2025 by ScegliAuto


Related tutorials

Replacing the Ignition Coil on a Ford Fiesta
Replacing the Ignition Coil on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today, we will see in this brief and simple guide the procedure for removing and replacing the ignition coil on a Ford Fiesta. First, open the bonnet…
How to Replace the Glow Plugs on the Ford Fiesta Mk5 1.4 TDCi
How to Replace the Glow Plugs on the Ford Fiesta Mk5 1.4 TDCi
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) This guide shows how to replace the glow plugs in the engine of the Ford Fiesta Mk5 1.4 TDCi. To dismantle the glow plugs, it is necessary to remove …
Where is the OBD2 port located on the 2021 Ford Fiesta?
Where is the OBD2 port located on the 2021 Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In the following guide, you will find the description of all the steps you need to follow in order to find the OBD2 port located inside the cabin of …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos