Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Ignition Coil on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Ignition coil

Today, we will see in this brief and simple guide the procedure for removing and replacing the ignition coil on a Ford Fiesta. First, open the bonnet of your car and start disconnecting the four spark plug leads; then use a socket spanner with an extension to unscrew the screws at the base of the coil, as shown in the video. Now remove the coil and disconnect its electrical connector; then install the new original coil, reconnecting the spark plug wiring, applying the reverse procedure of disassembly!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Spark Plugs on Ford Fiesta
Replacing Spark Plugs on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the ignition spark plugs on a Ford Fiesta. Remove the components in the engine bay to access the spark plugs. Remove the soundproofing pane…
How do you replace the spark plugs of the Ford Fiesta?
How do you replace the spark plugs of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To ensure that the candles of the Ford Fiesta are replaced, you will need to open the hood in order to locate the coils located on the top of the eng…
How to Find the Fuse Diagram for a 2001 Ford Fiesta
How to Find the Fuse Diagram for a 2001 Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) In this tutorial, you can see the fuse diagram for a 2001 Ford Fiesta. The fuse box located inside the vehicle's cabin contains fuses assigned to: ci…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos