Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs in a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Spark plugs

Replacing the spark plugs in a Ford Fiesta engine? Lift the front bonnet to access the spark plugs; start by removing the air filter housing cover: there are securing screws on top of it. Disconnect the coil from the cylinder head: grasp it with your hands and move it to extract it from above the head. Use a socket to unscrew the spark plugs and pull them out of the engine block. Fit the new spark plugs one at a time into the cylinder head, securing all the coils. Screw in the securing screws on top of the engine soundproofing cover.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the glow plugs in the Ford Fiesta 1.4 TDCi?
How to replace the glow plugs in the Ford Fiesta 1.4 TDCi?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this tutorial we can see how to replace the glow plugs in the Ford Fiesta 1.4 TDCi, a simple operation but one that requires good manual skills. F…
How to Remove Spark Plugs on a Ford Fiesta
How to Remove Spark Plugs on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Learn how to remove the spark plugs from a Ford Fiesta. Lift the bonnet to access the Fiesta's engine. Remove the engine cover panel, grasp the coil …
Replacing Spark Plugs on a Ford Fiesta
Replacing Spark Plugs on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replacing damaged spark plugs? Here’s how to remove them from the engine bay of the Fiesta. Remove the soundproofing panel covering the engine (if pr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos