Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Spark plugs

Replacing the ignition spark plugs on a Ford Fiesta. Remove the components in the engine bay to access the spark plugs. Remove the soundproofing panel covering the cylinder head. Remove all the coils from above the ignition spark plugs. Use the socket wrench to unscrew the spark plugs, pull them out of the cylinder head, and check for any damage. Take the new spark plugs and guide them into the cylinder head using the socket wrench extension, tighten them properly, and secure each coil above the cylinder head. Refit the engine soundproofing panel. Close the front bonnet after assembly. Start the car's engine with the key.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Ford Fiesta 5?
How to Replace the Spark Plugs on a Ford Fiesta 5?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the spark plugs on a Ford Fiesta 5, open the car's bonnet to access the components inside the engine bay. At the top of the engine block, …
Replacing Spark Plugs on a Ford Fiesta
Replacing Spark Plugs on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video tutorial, you will learn how to remove and replace the spark plugs in a Ford Fiesta engine. First, open the bonnet of your car and disc…
Replace Spark Plugs on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replace the spark plugs on a Ford Fiesta if they are damaged. Here’s how to remove them from inside the engine bay. Remove the soundproofing panel co…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos