Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Spark Plugs of the Ford Fiesta 1.4

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Spark plugs

This brief and simple guide provides instructions on how to remove and replace the spark plugs of the Ford Fiesta 1.4 engine. First, open the bonnet and start by disconnecting the electrical connectors of the spark plugs, located at the top of the engine; then use a socket with an extension to unscrew and remove the spark plugs, as shown in the video. Now install the new spark plugs, ensuring they are the correct type and have the same thread pitch; screw them in by hand and then tighten with a spanner (the manual specifies the torque for tightening the spark plugs).

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Ford Fiesta
How to Replace the Spark Plugs on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you start, open the bonnet of your Ford Fiesta. Begin by disconnecting the connectors attached to the spark plug leads. Next, unscrew and remo…
Replacing Spark Plugs on Ford Fiesta
Replacing Spark Plugs on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the ignition spark plugs on a Ford Fiesta. Remove the components in the engine bay to access the spark plugs. Remove the soundproofing pane…
Replacing Spark Plugs on a Ford Fiesta
Replacing Spark Plugs on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video tutorial, you will learn how to remove and replace the spark plugs in a Ford Fiesta engine. First, open the bonnet of your car and disc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos