Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Spark plugs

In this video tutorial, you will learn how to remove and replace the spark plugs in a Ford Fiesta engine. First, open the bonnet of your car and disconnect the leads from the spark plugs (a total of four): then unscrew the spark plugs using a ratchet wrench with an extension or a spark plug socket; finish unscrewing by hand. At this point, install the new ones of the correct type, screwing them in by hand first and then tightening with the wrench (if possible, use a torque wrench). Finally, reconnect the leads to the spark plugs and you're done!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Spark Plugs on Ford Fiesta
Replacing Spark Plugs on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the ignition spark plugs on a Ford Fiesta. Remove the components in the engine bay to access the spark plugs. Remove the soundproofing pane…
How to Replace the Spark Plugs on a Ford Fiesta 5?
How to Replace the Spark Plugs on a Ford Fiesta 5?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the spark plugs on a Ford Fiesta 5, open the car's bonnet to access the components inside the engine bay. At the top of the engine block, …
Replace Spark Plugs on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replace the spark plugs on a Ford Fiesta if they are damaged. Here’s how to remove them from inside the engine bay. Remove the soundproofing panel co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos