Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

This video shows how to replace the cabin filter in a second-generation Ford Kuga. First, ensure the vehicle is off, then work under the passenger glove compartment by unscrewing the two bolts underneath. This will remove the carpet covering.

Next, use a cross screwdriver to remove the black plastic cover that closes the cabin filter entrance. You can then remove the filter by simply sliding it out to the right; after replacing it, reassemble all components.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the 2017 Ford Kuga
How to replace the cabin air filter of the 2017 Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) If it is time to replace the cabin air filter of your second-generation Ford Kuga (2017) but you do not know how to do it, do not worry because below…
How to replace the cabin filter on the Ford Kuga?
How to replace the cabin filter on the Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) You can replace the cabin filter on the Ford Kuga by removing the dashboard trim panel located at the bottom near the steering column: once the panel…
Location of Cabin Air Filter on Ford Kuga
Location of Cabin Air Filter on Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) As clearly shown in the video, to access the cabin air filter, or pollen filter, on a Ford Kuga, you need to work in the area under the glove compart…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos