Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Ford Connect

Model: Ford Connect MK 2 - Years 2013-2023
Part: Warning light – error code

In this video tutorial, see how to reset the oil light, guiding you step by step for proper vehicle management independently, saving on maintenance costs. First, carry out maintenance such as an oil change on your vehicle; then get inside and notice the buttons on the steering wheel. Press the Buck button located to the left of the OK button, then press OK, and using the arrow buttons above the OK button, scroll until you find the message Setting; press the button to the right of OK. Press Information and Oil life, then press OK and then OK on Reset oil life, holding OK for a few seconds until the reset is complete.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the 2020 Ford Connect
How to reset the service light on the 2020 Ford Connect
Ford Connect (2013-2023 / MK 2) The steps to reset the service indicator light on a 2020 Ford Connect vehicle are very simple and quick. The first step is to turn on the instrument …
How to Reset the Service Light on a Ford Connect
How to Reset the Service Light on a Ford Connect
Ford Connect (2002-2013 / MK 1) In this video, you will see how to reset the service light on a Ford Connect MK1: naturally, after changing the oil and filter, and properly disposin…
How to reset the service light on a Ford Connect
How to reset the service light on a Ford Connect
Ford Connect (2013-2023 / MK 2) To reset the maintenance light on a Ford Transit Connect, turn the ignition switch to the ON position without starting the engine. Press the brake an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos