Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2020 Ford Connect

Model: Ford Connect MK 2 - Years 2013-2023
Part: Service warning light

The steps to reset the service indicator light on a 2020 Ford Connect vehicle are very simple and quick. The first step is to turn on the instrument panel. The second step is to press the accelerator pedal and brake pedal at the same time for about 20 seconds. The third step is to release both pedals at the end of the procedure. The fourth step is to turn off and on the instrument panel of the vehicle to complete the reset procedure. These steps can be used on other Ford models.

Posted on 26 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on the Ford Connect
How to Reset the Oil Change Light on the Ford Connect
Ford Connect (2013-2023 / MK 2) In this article, you will see the procedure to reset the oil change light, or service light, on the Ford Connect. To reset the light, start the instr…
How to reset the service light on the Ford Connect
How to reset the service light on the Ford Connect
Ford Connect (2013-2023 / MK 2) When the service light comes on in the Ford Connect, it means that it is necessary to perform a car service and immediately after reset the light. On…
How to Reset the Service Light on a Ford Connect
How to Reset the Service Light on a Ford Connect
Ford Connect (2002-2013 / MK 1) In this video, you will see how to reset the service light on a Ford Connect MK1: naturally, after changing the oil and filter, and properly disposin…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos