Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Ford Connect

Model: Ford Connect MK 2 - Years 2013-2023
Part: Service warning light

When the service light comes on in the Ford Connect, it means that it is necessary to perform a car service and immediately after reset the light. On this type of vehicle, the steps to be taken are simple and quick. The first step is to turn on the instrument panel. The second step is to press the brake pedal and the accelerator pedal and hold them down simultaneously. The third step is to wait 15/20 seconds. The fourth step is to turn off the instrument panel. The fifth and final step is to turn on the instrument panel again to complete the reset of the light.

Posted on 14 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on the Ford Connect
How to Reset the Oil Change Light on the Ford Connect
Ford Connect (2013-2023 / MK 2) In this article, you will see the procedure to reset the oil change light, or service light, on the Ford Connect. To reset the light, start the instr…
How to Reset the Service Light on a Ford Connect
How to Reset the Service Light on a Ford Connect
Ford Connect (2002-2013 / MK 1) In this video, you will see how to reset the service light on a Ford Connect MK1: naturally, after changing the oil and filter, and properly disposin…
How to reset the service light on the 2020 Ford Connect
How to reset the service light on the 2020 Ford Connect
Ford Connect (2013-2023 / MK 2) The steps to reset the service indicator light on a 2020 Ford Connect vehicle are very simple and quick. The first step is to turn on the instrument …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos