Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Connect

Model: Ford Connect MK 1 - Years 2002-2013
Part: Service warning light

In this video, you will see how to reset the service light on a Ford Connect MK1: naturally, after changing the oil and filter, and properly disposing of the used oil at an authorised centre, enter the cabin, press and hold the accelerator, press the brake pedal fully down, and then turn on the ignition. Continue to hold both pedals down for about 20 seconds, and the display will show "oil change required" and then display "Service: oil reset completed". You can start the vehicle and go. You are all set.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a Ford Connect
How to reset the service light on a Ford Connect
Ford Connect (2013-2023 / MK 2) To reset the maintenance light on a Ford Transit Connect, turn the ignition switch to the ON position without starting the engine. Press the brake an…
How to reset the service light on the Ford Connect
How to reset the service light on the Ford Connect
Ford Connect (2013-2023 / MK 2) When the service light comes on in the Ford Connect, it means that it is necessary to perform a car service and immediately after reset the light. On…
How to reset the service light on the 2020 Ford Connect
How to reset the service light on the 2020 Ford Connect
Ford Connect (2013-2023 / MK 2) The steps to reset the service indicator light on a 2020 Ford Connect vehicle are very simple and quick. The first step is to turn on the instrument …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos