Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the 2014 Ford Connect

Model: Ford Connect MK 2 - Years 2013-2023
Part: Service warning light

Resetting the oil light on the 2014 Ford Connect after an oil change is a very simple operation that can be done in a few minutes. The first step is to turn on the vehicle's instrument cluster and access the menu. The second step is to navigate through the menu until you select "SETTINGS" by pressing OK. The third step is to select "INFORMATIONS" from the submenu, then select "OIL LIFE" and "RESET OIL LIFE". Finally, turn off and then turn on the vehicle to confirm that the above steps were completed correctly.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on the Ford Connect
How to Reset the Oil Change Light on the Ford Connect
Ford Connect (2013-2023 / MK 2) In this article, you will see the procedure to reset the oil change light, or service light, on the Ford Connect. To reset the light, start the instr…
How to Reset the Service Light on a Ford Connect
How to Reset the Service Light on a Ford Connect
Ford Connect (2002-2013 / MK 1) In this video, you will see how to reset the service light on a Ford Connect MK1: naturally, after changing the oil and filter, and properly disposin…
How to Reset the Oil Warning Light on a 2017 Ford Connect
How to Reset the Oil Warning Light on a 2017 Ford Connect
Ford Connect (2013-2023 / MK 2) The steps to reset the oil warning light on a 2017 Ford Connect are: - turn on the ignition; - press the Menu button on the dashboard to access the s…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos