Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on a 2017 Ford Connect

Model: Ford Connect MK 2 - Years 2013-2023
Part: Service warning light

The steps to reset the oil warning light on a 2017 Ford Connect are: - turn on the ignition; - press the Menu button on the dashboard to access the settings; - scroll through the Menu and select "SETTINGS"; - scroll through the Menu and select "INFORMATIONS"; - scroll through the Menu and select "OIL SERVICE"; - scroll through the Menu and select "RESET"; Once all the above steps are completed, simply turn off the ignition and restart it to fully complete the oil warning light reset procedure.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Connect
How to Reset the Service Light on a Ford Connect
Ford Connect (2002-2013 / MK 1) In this video, you will see how to reset the service light on a Ford Connect MK1: naturally, after changing the oil and filter, and properly disposin…
How to Reset the Oil Change Light on the Ford Connect
How to Reset the Oil Change Light on the Ford Connect
Ford Connect (2013-2023 / MK 2) In this article, you will see the procedure to reset the oil change light, or service light, on the Ford Connect. To reset the light, start the instr…
How to reset the oil light on the 2014 Ford Connect
How to reset the oil light on the 2014 Ford Connect
Ford Connect (2013-2023 / MK 2) Resetting the oil light on the 2014 Ford Connect after an oil change is a very simple operation that can be done in a few minutes. The first step is …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos