Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How do you replace the Ford Focus fuel pump?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Fuel pump
Operation: How do you replace the Ford Focus fuel pump?

To be able to replace the fuel pump on the Ford Focus, you need to access the components in the lower part of the car, in particular the tank located at the rear. By unscrewing its fixing bolts, it will be possible to remove the tank from its housing and the pump inserted inside it can be removed. To do this, loosen the fixing bolts and disconnect the various pipes and connectors. When the old pump has been removed, it will be possible to insert a new one, so that all the removed parts can then be re-installed.


Posted on 12 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How much does it cost to overhaul the Ford Focus diesel pump? Read Answer
    • Focus 2011-2018 - How much does it cost to replace the fuel pump on the Ford Focus 1.8 TDCi? Read Answer
    • Focus 2011-2018 - Where is the fuel pump of the Ford Focus 1.6 Tdci? Read Answer
    • Focus 2011-2018 - Where is the diesel pump located in the Ford Focus estate? Read Answer
    • Focus 2011-2018 - Where is the inertia switch on the Ford Focus 1.6? Read Answer
    • Focus 1998-2004 - Where is the 2000 Ford Focus fuel pump located? Read Answer
    • Focus 2011-2018 - Where is the fuel pump located in a diesel Ford Focus 1.8? Read Answer
    • Focus 2004-2011 - Where is the Ford Focus fuel pump located? Read Answer
    • Focus 2004-2011 - Where is the fuel float of the Ford Focus? Read Answer
    • Focus 2004-2011 - How much does the Ford Focus float cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos