Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Blades on a Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Windshield wipers

To replace the windshield wiper blades on a Ford F-150, lift the wiper arms so that the blades are not in direct contact with the windshield. Position the blades perpendicular to the arms, then open the latch and pull the blade down to remove it. Once both blades are removed, install the new ones by securing them with the appropriate latches. After installing the new blades, position them on the windshield to ensure they function correctly.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the windshield wiper of the Ford F 150
How to replace the windshield wiper of the Ford F 150
Ford F-150 (2015-2020 / MK 13) If you need to replace one of the two wiper blades on your Ford F 150, but you don't know how to do it, just pay attention to the procedure described…
How to Replace Front Brake Pads on a Ford F-150?
How to Replace Front Brake Pads on a Ford F-150?
Ford F-150 (2009-2014 / MK 12) To replace the front brake pads on a Ford F-150, lift the vehicle so that the wheel corresponding to the pads to be removed is off the ground. Then, …
How to Replace the Speakers in a Ford F-150?
How to Replace the Speakers in a Ford F-150?
Ford F-150 (2009-2014 / MK 12) To replace the speakers in a Ford F-150, first remove the door panel. Detach the panel by unscrewing the screws located near the window switch and at…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos