Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the front bumper grille on the Ford Tourneo Custom

Model: Ford Tourneo MK 2 - Years 2013-2024
Part: Grille

Today, we will outline the main steps to remove and replace the front bumper grille on the Ford Tourneo and Tourneo Custom. First, open the bonnet of your car and start removing the plastic clips found at the top of the bumper; then pull the grille forward to unclip and remove it, as shown in the video. At this point, install the new radiator and front bumper grille, securing it properly on the sides and with the clips, following the video tutorial to the end!

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fold Down the Rear Seat of a Ford Tourneo Custom
How to Fold Down the Rear Seat of a Ford Tourneo Custom
Ford Tourneo (2013-2024 / MK 2) Before you begin, exit the cabin of your Ford Tourneo Custom and head to the right side of the vehicle. Start by opening the sliding side door by pul…
How to Fold or Remove the Rear Seats on Ford Tourneo Custom
How to Fold or Remove the Rear Seats on Ford Tourneo Custom
Ford Tourneo (2013-2024 / MK 2) In today’s video, we will see how to remove or fold the rear seats on a Ford Tourneo Custom, through various configurations that we will outline belo…
How to remove the rear seats of the Ford Tourneo Custom
How to remove the rear seats of the Ford Tourneo Custom
Ford Tourneo (2013-2024 / MK 2) In this guide we will see the instructions that will allow us to remove and configure as we like the rear seats of the Ford Tourneo Custom. First, we…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos