Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo / Fusion
    4. : How to change the time format in the Ford Mondeo

Ford Mondeo / Fusion - Video tutorial

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Car stereo
Operation: How to change the time format in the Ford Mondeo

Depending on your preferences, you can manually change the format of the time shown on the display of your Ford Mondeo, from 24h to 12h and vice versa. Below we will find out how to do this. First insert the key and start both the instrument panel and the car radio. Then locate and press the "Menu" button on the radio several times until you see the entry relating to the time format. At this point, just press the button with the right arrow above it once to switch from one format to another. Exit the menu and you are done.


Posted on 3 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Mondeo 2007-2014 - What is the radio code for the 2009 Ford Mondeo? Read Answer
    • Mondeo 2000-2007 - How to retrieve the radio code for the Ford Mondeo? Read Answer
    • Mondeo 2014-2021 - Where is the Ford Mondeo radio code? Read Answer
    • Mondeo 2007-2014 - Where is the Ford Mondeo car radio security code located? Read Answer
    • Mondeo 2007-2014 - What is the Ford Mondeo car radio unlock code? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos