Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster in a Ford Mondeo?

Model: Ford Mondeo / Fusion MK 4 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Instrument cluster

See other generations:
Video tutorial

In this tutorial, see how to remove the instrument cluster in a Ford Mondeo, a very simple and quick operation. First, ensure that the key is not inserted for safety.

Then, locate the two slots indicated, located just behind the steering wheel, insert a flat-head screwdriver into them, and unlock the retaining clips. Next, remove the upper cover of the steering column, unscrew the screws of the instrument cluster, and extract it by unlocking the upper clip.

To fit the replacement, simply follow the reverse procedure.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster of a Ford Mondeo
How to Remove the Instrument Cluster of a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) How do you remove the instrument cluster of a Ford Mondeo? Follow these steps to disassemble the instrument cluster. Use a screwdriver to remove the …
How to Reset the Service Light on the Ford Mondeo?
How to Reset the Service Light on the Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) The Service light that appears on the instrument cluster of the Ford Mondeo can be reset by inserting the ignition key into the corresponding slot: b…
How to Remove the Instrument Cluster from a Ford Mondeo
How to Remove the Instrument Cluster from a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) In this video, learn how to remove the speedometer from a Ford Mondeo. Start by removing the glove compartment located under the dashboard, then unsc…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos