Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford Mondeo?

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

The Service light that appears on the instrument cluster of the Ford Mondeo can be reset by inserting the ignition key into the corresponding slot: by inserting the key and turning it to switch on the instrument cluster, you can then press the brake and accelerator pedals simultaneously for a few seconds.

After this time has passed, you can release both pedals and turn off the instrument cluster: when it is turned on again, you will notice that the maintenance interval and the Service light have been completely reset.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2012 Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) To reset the service light on a 2012 Ford Mondeo, do the following: -turn on the ignition; -press the OK button on the steering wheel; -select the se…
How to reset the service light on the Ford Mondeo 3
How to reset the service light on the Ford Mondeo 3
Ford Mondeo / Fusion (2007-2014 / MK 3) In the following guide, you will find the description of all the steps you need to take to complete the manual reset procedure for the service light …
How to Reset the Service Light on a Ford Mondeo
How to Reset the Service Light on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) The following steps will show you how to reset the maintenance service light on a Ford Mondeo. First, get inside the vehicle and start the instrument…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos