Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Ford Mondeo

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Instrument cluster

See other generations:
Video tutorial

In this video, learn how to remove the speedometer from a Ford Mondeo. Start by removing the glove compartment located under the dashboard, then unscrew the screws in the trim at the bottom of the steering wheel using a screwdriver (remove the piece and disconnect the power cable).

Remove the plastic cover on the steering wheel and the one under the instrument cluster. Begin unscrewing the screws around the instrument cluster and extract the piece by disconnecting the cables.

Finally, after fitting the new piece, test its proper functioning.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster of a Ford Mondeo
How to Remove the Instrument Cluster of a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) How do you remove the instrument cluster of a Ford Mondeo? Follow these steps to disassemble the instrument cluster. Use a screwdriver to remove the …
How to Remove the Stereo from a Ford Mondeo
How to Remove the Stereo from a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Do you want to remove the stereo from your Ford Mondeo but don't know how to proceed? Let's see in this video how to remove the original stereo from …
How to Remove the Instrument Cluster in a Ford Mondeo?
How to Remove the Instrument Cluster in a Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) In this tutorial, see how to remove the instrument cluster in a Ford Mondeo, a very simple and quick operation. First, ensure that the key is not ins…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos