Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stereo from a Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Car stereo

Do you want to remove the stereo from your Ford Mondeo but don't know how to proceed? Let's see in this video how to remove the original stereo from your car: first, remove the plastic trim from the dashboard using a plastic spatula, then detach the central frame of the stereo (where the air vents are located) along with the relevant clips for the control buttons. Use a suitable screwdriver to unscrew the securing screws of the car radio. Pull the stereo out by hand and disconnect the cables (for power and the antenna). To reassemble, proceed in reverse.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the radio from a Ford Mondeo
How to remove the radio from a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Do you want to remove the stereo from your Ford Mondeo but don't know how? This guide shows you how to remove the original stereo. Remove the trim fr…
Removing the Radio from a Ford Mondeo
Removing the Radio from a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Removing the head unit from a Ford Mondeo? Here’s how to take it out from the central console. Remove the covering plastics located above the central…
How to Replace the Radio in a Ford Mondeo
How to Replace the Radio in a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) The first step is to lift the panel at the base of the gear lever using a plastic lever. Then, lift the panel over the cup holders. By releasing the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos