Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo / Fusion
    4. : Radio disassembly on a Ford Mondeo

Ford Mondeo / Fusion - Video tutorial

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Car stereo
Operation: Radio disassembly on a Ford Mondeo

Removing the car stereo on a Ford Mondeo? Let's see how the central dashboard can be removed from inside. We remove the plastic covers placed above the central tunnel and on the sides of the radio. We unscrew the clamping screws on the sides of the stereo. We use the original metal sticks to disassemble the stereo. We insert the keys in the spaces on the sides of the plastic cover of the stereo. We pull the stereo towards us with our hands (as in the video), extract the car radio, paying attention to the various wiring of the same (disconnect the power supply terminals and the antenna cable). We mount the original car radio in the central dashboard, connect the electrical terminals and screw with screws.


Posted on 11 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Mondeo 2007-2014 - What is the radio code for the 2009 Ford Mondeo? Read Answer
    • Mondeo 2000-2007 - How to retrieve the radio code for the Ford Mondeo? Read Answer
    • Mondeo 2014-2021 - Where is the Ford Mondeo radio code? Read Answer
    • Mondeo 2007-2014 - Where is the Ford Mondeo car radio security code located? Read Answer
    • Mondeo 2007-2014 - What is the Ford Mondeo car radio unlock code? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos